Assign modules on offcanvas module position to make them visible in the sidebar.

Previous Next
1 2 3

ALPINE Gear Oil SAE 80W-90 GL-4


Specifications:
API GL-4 • MIL-L-2105

Recommendations*:
MB 235.1
MAN 341 Typ Z2
MAN 341 Typ E1
Ford SQM-2C-9008 A
ZF TE-ML 02B, 17A

Downloads:
Product data sheet
Safety data sheet
Container Prod.-No.
20 x 1 ltr. 0100681
4 x 5 ltr. 0100682
20 ltr. 0100683
60 ltr. 0100684
208 ltr. 0100685
ALPINE Gear Oil 80W-90 GL-4 is produced from selected base oils with additives tailored thereto. The EP additives contained in the gear oil form a load-bearing lubricant layer during tooth engagement between the tooth flanks. It reduces abrasion wear on the tooth flanks during the motion sequence under high mechanical stress. The gear oil is stable to ageing even under high thermal load. The good cold flow properties are due to the high refinement degree of the base oil and the flow improver it contains. The gear oil contains suitable active substances to suppress foaming and the wetted machine parts are protected against corrosive effects.
ALPINE Gear Oil 80W-90 GL-4 is compatible with the usual sealing materials.

Details of the Product


 

ALPINE Gear Oil SAE 80W-90 GL-5


Specifications:
API GL-5
MIL-L-2105 C/D

Recommendations*:
DAF
MAN 342 M1, 342 M2
MB 235.0
NATO O-226
SAE J2360
SCANIA STO 1:0
Volvo 1273.10
ZF TE-ML 05A, 07A, 12E,
16C, 17B, 19B, 21A

Downloads:
Product data sheet
Safety data sheet
Container Prod.-No.
20 x 1 ltr. 0100701
4 x 5 ltr. 0100702
20 ltr. 0100703
60 ltr. 0100704
208 ltr. 0100705
ALPINE Gear Oil 80W-90 GL-5 is produced from selected base oils with additives tailored thereto. The EP additives contained in the gear oil form a load-bearing lubricant layer on the tooth flanks, which prevents scuffing wear and considerably reduces abrasion wear even under the highest mechanical load. The gear oil is very stable to ageing even under high thermal stress. The good cold flow properties are due to the high refinement degree of the base oil and the flow improver it contains. The gear oil contains suitable active substances to suppress foaming and the wetted machine parts are protected against corrosive effects.
ALPINE Gear Oil 80W-90 GL-5 is compatible with the usual sealing materials.

Details of the Product


 

ALPINE Gear Oil TDL SAE 80W-90


Specifications:
API GL-5
API GL-4
SAE J2360 (Mil-PRF-2105E)

Recommendations*:
MB 235.0 / MB 235.6
MAN 3343 Typ M,
MAN 342 M1/M2
MIL-L-2105D
Scania STO 1:0
Volvo 1273.21 / 1273.10
ZF TE-ML 01, 05A, 07A, 08,
12A/E, 16B/C/D, 17B, 19B,
21A

Downloads:
Product data sheet
Safety data sheet
Container Prod.-No.
20 x 1 ltr. 0100721
4 x 5 ltr. 0100722
20 ltr. 0100723
60 ltr. 0100724
208 ltr. 0100725
ALPINE Gear Oil TDL is a HC-synthetic high-performance gear oil for universal use. Characterised by the following properties:
  • Excellent thermal stability
  • High viscosity index
  • Very high shear stability
  • Excellent corrosion protection
  • Extension of oil change intervals
  • Good driving comfort
  • Enhanced wear protection

Details of the Product


 

ALPINE Syngear FE 75W-80


Specifications:
API GL-4

Recommendations*:
BMW MTF LT-1/-2/-3/-4
FORD WSS-M2C200-C/
D2, GM 194004/19259104
(BOT 303), GM 1940182 /
1940764 / 1940768, MB
235.10, NISSAN MT-XZ /
MT-XZ TL (JR Type), PSA
B 71 2330, Special Gear
Oil, MTF 94, Special
Honda MTF/MTF-II/MTF-III,
Tranself NFJ, NFP, TRJ,
TRT, TRZ, Volvo 97308 /
97309, VW G009 317,
VW G052 171, G052 178,
VW G052 512, G052 726,
VW G060 726, VW G 50,
G052 527 A2, G070 726 A2

Downloads:
Product data sheet
Safety data sheet
Container Prod.-No.
20 x 1 ltr. 0101581
4 x 5 ltr. 0101582
20 ltr. 0101583
60 ltr. 0101584
208 ltr. 0101585
ALPINE Syngear FE 75W-80 is a fully synthetic high-performance gear oil with reduced cold viscosity for manual transmissions.ALPINE Syngear FE 75W-80 has the following advantages over conventional gear oils:
  • Excellent low-temperature properties, therefore low „cold wear“
  • Excellent thermal stability
  • Very high viscosity index
  • Very high shear stability
  • Avoidance of cold scratches and effective noise damping
  • Excellent corrosion and wear protection
  • Less abrasion and consequently extended gear life

Details of the Product


 

ALPINE Syngear SAE 75W-90


Specifications:
API GL-4 / GL-5, MT-1
MIL-L-2105 D/E

Recommendations*:
BMW 83229407768,
BMW OSP, BMW SAF-XO,
BOT 328, 130M, 720, DAF
LKW, Iveco, Mack GO-J,
MAN 342 Typ S1/S2, MB
235.8 / 235.11, Renault LKW,
SCANIA STO 1:0, Volvo
97312 / 97315, VW 501 50
(VW G052 911 A1/A2)
ZF TE-ML 02B, 05B, 07A,
12B/N, 16F, 17B, 19C, 21B

Downloads:
Product data sheet
Safety data sheet
Container Prod.-No.
20 x 1 ltr. 0100741
4 x 5 ltr. 0100742
20 ltr. 0100743
60 ltr. 0100744
208 ltr. 0100745
ALPINE Syngear 75W-90 is a fully synthetic smooth-running gear oil for manual transmissions and heavily loaded axle drives. ALPINE Syngear 75W-90 has the following advantages over conventional transmission oils:
  • Excellent cold properties
  • Excellent thermal stability
  • Very high viscosity index
  • Very high shear stability
  • Avoidance of cold scratches and effective noise damping
  • Excellent corrosion protection
  • Reduction of fuel consumption
  • Extension of oil change intervals
  • Less abrasion and consequently extended gear life

Details of the Product


 

ALPINE Gear Oil 85W-90 LS


Specifications:
API GL-5 / LS
MIL-L-2105 C/D
ZF TE-ML 05

Downloads:
Product data sheet
Safety data sheet
Container Prod.-No.
20 ltr. 0100763
60 ltr. 0100764
208 ltr. 0100765
ALPINE Gear Oil 85W-90 LS is prescribed for highly stressed hypoid toothed drive axles with self-locking differentials.
ALPINE Gear Oil 85W-90 LS contains special additives to limit slip (limited slip) and prevent noise when driving around bends.

Details of the Product


 

ALPINE Gear Oil 85W-140 GL-5


Specifications:
API GL-5
MIL-L-2105 C/D

Downloads:
Product data sheet
Safety data sheet
Container Prod.-No.
20 ltr. 0100783
60 ltr. 0100784
208 ltr. 0100785
ALPINE Gear Oil 85W-140 GL-5 is produced from selected base oils with additives tailored thereto to prevent tooth flank damage. The EP additives contained in the gear oil form a load-bearing lubricant layer on the tooth flanks, which prevents scuffing wear and considerably reduces abrasion wear even under the highest mechanical load. The gear oil is very stable to ageing even under high thermal stress. The good cold flow properties are due to the high refinement degree of the base oil and the flow improver it contains. The gear oil contains suitable active substances to suppress foaming and the wetted machine parts are protected against corrosive effects.
ALPINE Gear Oil 85W-140 GL-5 is compatible with the usual sealing materials.

Details of the Product


 

* meets the requirements of the OEM manufacturer